Breaking Joints (Break Out)

Ohms Law

Breaking Joints

• Check that a permit to work has been validated and issued for the work to be carried out and that all measures regarding venting, draining and any isolations have been completed.
• Ensure that all personnel are fully aware of the Break of Containment Procedure/ Guidance Notes and all documentation is completed i.e. Break of Containment checklist etc.

Under no circumstances should the work commence until all present are 100% satisfied with the proposed scope and the safety precautions to be implemented

• Utilise only the correct equipment for the work being carried out.
• When opening a flange / joint, never stand directly alongside or below the joint, in case there are any leakages.

If there are any signs of pressure in the system, STOP immediately and re-tighten the flange to prevent any possible leakage and notify the supervisor asap.

• Do not trust gauges, but prove line is de-pressurised by physically opening drains, vents etc.